Replacement front wheel for the City Select 2 To replace both front wheels you will need to purchase two.
Not compatible with Select original or Select Lux
Check out our Single & Double Stroller comparison guides to help you work out what stroller best fits your family's needs.
Seat, harness, and canopy care:
- Do not use bleach, solvents or abrasive cleaning materials. - Do not press, iron, dry clean or tumble dry. - Always remove the metal frame and PE boards from the seat before washing. - Refer to the care tag on your seat pad and canopy for washing instructions. If in doubt, handwash only. - To clean harness, surface wash with a damp cloth using warm water and mild soap; air dry. Do not machine wash harness or immerse in water, as doing so may weaken the straps. - If the seat cover, harness, or canopy requires replacing, only use parts sourced through Baby Jogger NZ.
Frame care: Plastic and metal parts may be surface washed only, using warm water and mild soap. Dry with a soft towel.
Wheel care: The wheels can be cleaned using a damp cloth or a directly applied hose; dry off any moisture with a soft towel or cloth.
Belly Bar care: Please do not lift your stroller by the belly bar. It is not designed for this use and may break with too much force applied. Use the easy-fold, fabric handle in the seat to fold, lift, and carry the stroller.
Beach use: If you use your stroller at the beach, the frame will need to be sprayed down to ensure that the salt from the air, water, and sand doesn't cause corrosion. Then, dry the stroller completely.
Wet weather: After use in wet weather, again, dry the stroller completely before storing.
Storage: Always store in a dry and safe environment. Do not store outside or near a direct heat source such as a radiator or fire.
CITY GO CAPSULE CARE
The City Go Car Seat Capsule has a lifetime of 6 years, provided it has remained impact-free and fit for purpose without damage.
Never use the capsule without the seat fabric attached.
The harness, shell and hardware may be surface washed only, using warm water and mild soap. Air-dry the harness and dry the shell and hardware with a soft towel.
Do not machine wash the harness or immerse it in water, as doing so may weaken the straps.
Machine wash seat and canopy in cold water with mild soap on delicate cycle and drip dry.
Do not use bleach, solvents or abrasive cleaning materials.
Do not press, iron, dry clean or tumble dry.
Always store the capsule in a dry and safe environment.
Do not store outside or near a direct heat source such as a radiator or fire.
CITY TURN CARE
The City Turn Car Seat has a lifetime of 10 years, provided it has remained impact-free and fit for purpose without damage.
Never use car seat without the seat pad attached.
Seat pad care: Refer to the care tag on your seat pad for washing instructions.
Shell care: Spot clean using warm water and mild soap. Do not use any other cleaning agents or bleach.
Harness care: Surface wash with a damp cloth using warm water and mild soap; air dry. Do not machine wash harness or immerse in water, as doing so may weaken the straps. If harness straps or lower anchor attachment belt become frayed or heavily soiled, do not use until resolved. Contact our customer service team for support with this.
Buckle care: - Removing buckle: Remove buckle to clean. Do this by rotating the car seat and locating the metal retainer on the underside of the seat shell. Rotate the metal retainer up through the shell and pad. From the front, pull out the buckle. - Cleaning: To clean, place the buckle in a cup of warm water and gently agitate the buckle. Press the red button several times while in the water. Do not submerge the buckle strap. Do not use soaps, household detergents or lubricants. Shake out excess water and allow to air dry. Repeat steps as needed until it fastens with a click. - Reattaching buckle: Re-insert the buckle into the same slot it was removed. Pull up on crotch buckle to make sure it is secured. - WARNING! Inspect and clean buckle from time to time to remove any objects or debris that could prevent latching.
Cup holder care: Cup holder is dishwasher safe.
Storage: - Always store the car seat in a dry and safe environment. - Do not store outside or near a direct heat source such as a radiator or fire.